Skip to main content

Ideal Current Source

CI

CircuitSim

·

Created Oct 3, 2026

·

Updated Oct 3, 2026

Preview will appear once the owner saves the schematic
Details

Components

2


Schematic

Yes


Simulation

DC operating point


Copies

Not copied yet

About this circuit

An ideal current source maintains its set current while its output voltage changes with load resistance.

Circuit notes

Ideal Current Source

An ideal current source maintains its set current while its output voltage changes with load resistance.

The DC current source supplies 10 mA into R1 = 1 kΩ. Its arrow points toward the output. Vload measures the voltage needed to sustain that current; Iload measures the current through R1.

V=IR=(10 mA)(1 kΩ)=10 VV=IR=(10\,\mathrm{mA})(1\,\mathrm{k\Omega})=10\,\mathrm{V} P=I2R=100 mWP=I^2R=100\,\mathrm{mW}

A voltage source sets voltage and lets the load determine current. This ideal current source sets current and lets the load determine voltage.

Try it. Change R1’s Resistance to 2 kΩ and run the operating-point simulation. Iload remains 10 mA while Vload becomes 20 V. Restore 1 kΩ. You can also vary the source’s DC current and predict the new voltage before running.

Read the results. The table shows the steady-state voltage and current directly. No time waveform is needed for this constant input and resistive load.

Model limits. The source has unlimited voltage compliance and power capability. A practical current source maintains current only within its supply and thermal limits. An ideal source driving an open circuit has no finite operating-point voltage.

Components used

Components used
2 components
NameManufacturerMPNCountType

DC Current Source

Generic

—

1

Official

Resistor

Generic

—

1

Official

Try this circuit yourself

Free to get started. No download — runs in your browser with a full SPICE engine.