Bipolar Current Mirror
CircuitSim
·
Created Oct 3, 2026
·
Updated Oct 3, 2026
Details
Components
3
Schematic
Yes
Simulation
DC operating point
Copies
Not copied yet
About this circuit
Matched transistors copy a resistor-defined reference current into a second branch.
Circuit notes
Bipolar Current Mirror
Matched transistors copy a resistor-defined reference current into a second branch.
Circuit operation
Q1 is diode-connected: its collector and base share the reference node. Q2 shares that base voltage and the grounded emitter. R1 sets the reference branch current; RL is the output load.
Expected behavior
Expect approximately 0.42 mA in each branch. The output current is slightly smaller because the reference branch also supplies two base currents. RL can change output voltage without greatly changing current until Q2 runs out of collector voltage.
Reading the results
The first voltage probe is green and the second is red. Additional voltage traces use distinct colors. Current probes, when present, start with blue and then purple. The operating-point table opens with comfortable row spacing. Zoom to extents includes the complete schematic.
The operating-point table opens automatically with the steady-state voltages and currents.
Try a change
Set RL to 2.5 kΩ; output voltage changes while mirrored current remains nearly constant. Restore the saved values after comparing the result.
Model limits
These are generic transistor models, not a specific manufactured part. The bipolar models use nominal forward current gain 100 with illustrative junction capacitances and transit times. Device mismatch, temperature drift, layout parasitics, breakdown and detailed noise are not represented. The schematic and component properties expose the values used.
Components used
Components used
3 components
Try this circuit yourself
Free to get started. No download — runs in your browser with a full SPICE engine.