Skip to main content

Colpitts Oscillator

CI

CircuitSim

·

Created Oct 3, 2026

·

Updated Oct 3, 2026

Preview will appear once the owner saves the schematic
Details

Components

5


Schematic

Yes


Simulation

Transient analysis


Copies

Not copied yet

About this circuit

A capacitive divider feeds energy from a transistor back into an LC resonator.

Circuit notes

Colpitts Oscillator

A capacitive divider feeds energy from a transistor back into an LC resonator.

Circuit operation

Q1 is a common-base stage: CB makes the bias node an AC ground. L1 resonates with the series combination of C1 and C2. Their midpoint feeds the emitter through CF, replacing resonator loss with transistor gain.

Expected behavior

Ceq=C1C2C1+C2C_{eq}=\frac{C_1C_2}{C_1+C_2} f0≈12πL1Ceq≈52.8 kHzf_0\approx\frac{1}{2\pi\sqrt{L_1C_{eq}}}\approx52.8\,\mathrm{kHz}

A small initial capacitor voltage starts the oscillation. The tank swings around the 12 V collector supply and can exceed it. RLOSS models resonator loading; transistor nonlinearity limits amplitude. The chart opens on the last 200 µs after startup.

Reading the results

The first voltage probe is green and the second is red. Additional voltage traces use distinct colors. Current probes, when present, start with blue and then purple. The chart opens with separate traces on a fixed time window; the table retains the same probe order. Zoom to extents includes the complete schematic.

The saved transient runs for 2.0 ms with a maximum step of 0.10 µs. Compare settled cycles after startup and use time-axis cursors to measure delays or periods.

Try a change

Set C1 to 20 nF; the resonant frequency decreases. Restore the saved values after comparing the result.

Model limits

These are generic transistor models, not a specific manufactured part. The bipolar models use nominal forward current gain 100 with illustrative junction capacitances and transit times. Device mismatch, temperature drift, layout parasitics, breakdown and detailed noise are not represented. The schematic and component properties expose the values used.

Components used

Components used
5 components
NameManufacturerMPNCountType

Capacitor

Generic

—

4

Official

Resistor

Generic

—

4

Official

DC Voltage Source

Generic

—

1

Official

Inductor

Generic

—

1

Official

NPN BJT

Generic

—

1

Official

Try this circuit yourself

Free to get started. No download — runs in your browser with a full SPICE engine.