RTL Inverter
CircuitSim
·
Created Oct 3, 2026
·
Updated Oct 3, 2026
Details
Components
4
Schematic
Yes
Simulation
Transient analysis
Copies
Not copied yet
About this circuit
A base resistor and a common-emitter transistor implement resistor-transistor inversion.
Circuit notes
RTL Inverter
A base resistor and a common-emitter transistor implement resistor-transistor inversion.
Circuit operation
The input supplies base current through RB. Q1 collector and its pull-up resistor form the output. A high input pulls the output low; a low input lets RC pull it high.
Expected behavior
This is resistor-transistor logic. The input draws current when high, and output high level depends on external loading. Increasing RB exposes the loss of a strong low output when base drive is insufficient.
Reading the results
The first voltage probe is green and the second is red. Additional voltage traces use distinct colors. Current probes, when present, start with blue and then purple. The chart opens with separate traces on a fixed time window; the table retains the same probe order. Zoom to extents includes the complete schematic.
The saved transient runs for 4.0 ms with a maximum step of 1.00 µs. Compare settled cycles after startup and use time-axis cursors to measure delays or periods.
Try a change
Set RB to 220 kΩ; the smaller base current may prevent full saturation under the same load. Restore the saved values after comparing the result.
Model limits
These are generic transistor models, not a specific manufactured part. The bipolar models use nominal forward current gain 100 with illustrative junction capacitances and transit times. Device mismatch, temperature drift, layout parasitics, breakdown and detailed noise are not represented. The schematic and component properties expose the values used.
Components used
Components used
4 components
Try this circuit yourself
Free to get started. No download — runs in your browser with a full SPICE engine.