Skip to main content

ECL NOR/OR

CI

CircuitSim

·

Created Oct 3, 2026

·

Updated Oct 3, 2026

Preview will appear once the owner saves the schematic
Details

Components

5


Schematic

Yes


Simulation

Transient analysis


Copies

Not copied yet

About this circuit

A differential pair steers a nearly constant current to produce complementary OR and NOR outputs without saturating the switching transistors.

Circuit notes

ECL NOR/OR

A differential pair steers a nearly constant current to produce complementary OR and NOR outputs without saturating the switching transistors.

Circuit operation

Q1 and Q2 share one collector load and act as parallel input devices. Q3 compares them with a −1.3 V reference. IT steers 1 mA between the two load branches, with a −5.2 V supply.

Expected behavior

Vloaded≈−ITRC≈−1 VV_{loaded}\approx-I_TR_C\approx-1\,\mathrm V OR=A+BNOR=A+B‾\begin{gathered}OR=A+B\\NOR=\overline{A+B}\end{gathered}

An input of −0.9 V represents high and −1.7 V represents low. The outputs shown are the internal collector signals, approximately 0 V and −1 V. Standard ECL families often add emitter-follower output buffers that shift these levels. The current-steering devices avoid saturation.

Reading the results

The first voltage probe is green and the second is red. Additional voltage traces use distinct colors. Current probes, when present, start with blue and then purple. The chart opens with separate traces on a fixed time window; the table retains the same probe order. Zoom to extents includes the complete schematic.

The saved transient runs for 4.0 ms with a maximum step of 1.00 µs. Compare settled cycles after startup and use time-axis cursors to measure delays or periods.

Try a change

Set V1 period to 3 ms and pulse width to 1.45 ms; compare the truth table at the new input timing. Restore the saved values after comparing the result.

Model limits

These are generic transistor models, not a specific manufactured part. The bipolar models use nominal forward current gain 100 with illustrative junction capacitances and transit times. Device mismatch, temperature drift, layout parasitics, breakdown and detailed noise are not represented. The schematic and component properties expose the values used.

Components used

Components used
5 components
NameManufacturerMPNCountType

NPN BJT

Generic

—

3

Official

DC Voltage Source

Generic

—

2

Official

Pulse Voltage Source

Generic

—

2

Official

Resistor

Generic

—

2

Official

DC Current Source

Generic

—

1

Official

Try this circuit yourself

Free to get started. No download — runs in your browser with a full SPICE engine.