Skip to main content

2-Bit Comparator

CI

CircuitSim

·

Created Oct 3, 2026

·

Updated Oct 3, 2026

Preview will appear once the owner saves the schematic
Details

Components

7


Schematic

Yes


Simulation

Transient analysis


Copies

Not copied yet

About this circuit

Compare two unsigned two-bit numbers and indicate less than, equal, or greater than.

Circuit notes

2-Bit Comparator

Compare two unsigned two-bit numbers and indicate less than, equal, or greater than.

Circuit operation

The XNOR gates compare corresponding bits. The high-bit comparison decides first; the low-bit comparison matters only when the high bits are equal. Three outputs indicate equality, greater than, and less than.

Expected behavior

A=A0+2A1B=B0+2B1\begin{gathered}A=A_0+2A_1\\B=B_0+2B_1\end{gathered} G+E+L=1G+E+L=1

A0 and B0 are the least-significant bits. Exactly one result is high after settling. The four source periods exercise every pairing of the two two-bit numbers.

Reading the results

The first voltage probe is green and the second is red. Additional voltage traces use distinct colors. Current probes, when present, start with blue and then purple. The chart opens with separate traces on a fixed time window; the table retains the same probe order. Zoom to extents includes the complete schematic.

The saved transient runs for 16.0 ms with a maximum step of 2.00 µs. Compare settled cycles after startup and use time-axis cursors to measure delays or periods.

Try a change

Set V1 period to 3 ms and pulse width to 1.498 ms. Verify the same logic relationship with a different input sequence. Restore the saved values after comparing the result.

Model limits

Logic gates use ideal threshold models; storage elements include finite propagation delay. Unless a transistor or LED is explicitly drawn, internal supplies, input loading, output-current limits, and metastability are abstracted. Device mismatch, temperature drift, layout parasitics, breakdown and detailed noise are not represented. The schematic and component properties expose the values used.

Components used

Components used
7 components
NameManufacturerMPNCountType

Digital Inverter

Generic

—

4

Official

Pulse Voltage Source

Generic

—

4

Official

AND 2-Input

Generic

—

3

Official

Resistor

Generic

—

3

Official

AND 3-Input

Generic

—

2

Official

OR 2-Input

Generic

—

2

Official

XNOR 2-Input

Generic

—

2

Official

Try this circuit yourself

Free to get started. No download — runs in your browser with a full SPICE engine.