Decimal Counter
CircuitSim
·
Created Oct 3, 2026
·
Updated Oct 3, 2026
Details
Components
3
Schematic
Yes
Simulation
Transient analysis
Copies
Not copied yet
About this circuit
Count through the ten BCD states 0000 through 1001 and then return to zero.
Circuit notes
Decimal Counter
Count through the ten BCD states 0000 through 1001 and then return to zero.
Circuit operation
The decade counter advances on rising Clock edges while Enable is high. Its four outputs encode decimal digits in binary-coded decimal. Reset is synchronous and has priority.
Expected behavior
The settled sequence runs from 0000 to 1001 and returns to 0000; states 1010 through 1111 are skipped. The saved run also shows an enable pause and reset.
Reading the results
The first voltage probe is green and the second is red. Additional voltage traces use distinct colors. Current probes, when present, start with blue and then purple. The chart opens with separate traces on a fixed time window; the table retains the same probe order. Zoom to extents includes the complete schematic.
The saved transient runs for 22.0 ms with a maximum step of 2.00 µs. Compare settled cycles after startup and use time-axis cursors to measure delays or periods.
Try a change
Set V1 period to 2 ms and pulse width to 998 µs. State changes follow the slower clock while the logic relationship remains the same. Restore the saved values after comparing the result.
Model limits
Logic gates use ideal threshold models; storage elements include finite propagation delay. Unless a transistor or LED is explicitly drawn, internal supplies, input loading, output-current limits, and metastability are abstracted. Device mismatch, temperature drift, layout parasitics, breakdown and detailed noise are not represented. The schematic and component properties expose the values used.
Components used
Components used
3 components
Try this circuit yourself
Free to get started. No download — runs in your browser with a full SPICE engine.