Memristor Hard-Switching 1
CircuitSim
·
Created Oct 3, 2026
·
Updated Oct 3, 2026
Details
Components
3
Schematic
Yes
Simulation
Transient analysis
Copies
Not copied yet
About this circuit
Fast programming drives the memristor between its resistance limits during a smooth bipolar sine wave.
Circuit notes
Memristor Hard-Switching 1
Fast programming drives the memristor between its resistance limits during a smooth bipolar sine wave.
Circuit operation
The input is the same 3 V peak, 100 Hz sine used in the gradual-response example. MR1 now has a larger programming rate, 2 MΩ/(V·s), which drives it rapidly toward 1 kΩ or 10 kΩ.
Expected behavior
The sine voltage is smooth, but current changes rapidly as resistance approaches or leaves a bound. Positive voltage drives the high-resistance state; negative voltage drives the low-resistance state. “Hard switching” here describes fast state saturation, not an ideal discontinuous relay or a particular manufactured memory cell.
Reading the results
The first voltage probe is green; the second, when present, is red. The first current probe is blue. The schematic opens fitted to its extents. The saved transient spans 30 ms with a maximum step of 2 µs. The chart uses separate voltage and current lanes, and the table retains the same probe order.
Try a change
Reduce MR1 programming rate Beta to 500 kΩ/(V·s); sharp limiting transitions become gradual state changes. Restore the saved values after comparison.
Model limits
MR1 uses the ngspice voltage-threshold memristor model. Alpha is zero, so subthreshold reads preserve state. Rmin, Rmax, Rinit, Vt, and Beta are illustrative values. This is a memristive-system model, not a material-specific or thermal model.
Reference: ngspice memristor model and threshold-model paper.
Components used
Components used
3 components
Try this circuit yourself
Free to get started. No download — runs in your browser with a full SPICE engine.