Marx Generator
CircuitSim
·
Created Oct 3, 2026
·
Updated Oct 3, 2026
Details
Components
4
Schematic
Yes
Simulation
Transient analysis
Copies
Not copied yet
About this circuit
Three capacitors charge in parallel and discharge through spark gaps in series to produce a higher-voltage pulse.
Circuit notes
Marx Generator
Three capacitors charge in parallel and discharge through spark gaps in series to produce a higher-voltage pulse.
Circuit operation
The three 1 nF capacitors charge through the upper and lower 1 MΩ resistor chains. When the spark gaps ignite, they connect the charged stages in series and deliver a pulse through SG3 to RL = 100 kΩ.
Expected behavior
For three fully charged 500 V stages, the ideal no-loss peak would be 1.5 kV. Actual peak is lower because the gaps fire at finite voltage, charging is unequal, and the load and arcs consume energy. Compare the first-stage capacitor voltage with the output. The load current is positive during the main pulse.
Reading the results
The first voltage probe is green; the second, when present, is red. The first current probe is blue. The schematic opens fitted to its extents. The saved transient spans 60 ms with a maximum step of 2 µs. The chart uses separate voltage and current lanes, and the table retains the same probe order.
Try a change
Double all three capacitors to 2 nF. Recharge and discharge intervals become longer; the ideal series voltage multiplication remains three. Restore the saved values after comparison.
Model limits
The spark gap is a symmetric functional model: voltage-triggered ignition, current-held conduction, a constant arc drop, finite resistance, and finite switching delay. It does not model plasma dynamics, gas pressure, electrode geometry, heating, insulation, or physical construction.
Reference: spark-gap relaxation behavior.
Components used
Components used
4 components
Try this circuit yourself
Free to get started. No download — runs in your browser with a full SPICE engine.