DC Source Load Operating Point
CircuitSim
·
Created Jul 5, 2026
·
Updated Jul 5, 2026
Details
Components
1
Schematic
Yes
Simulation
DC operating point
Copies
Not copied yet
About this circuit
A DC voltage source powering a simple resistive load with voltage and current measurements.
Circuit notes
DC Source Load Operating Point
Application
This circuit shows a DC source powering a simple resistive load, the most direct way to verify source polarity and magnitude.
Schematic Organization
The featured source is on the left, the 1K load is on the right, and the bottom conductor is the shared return with one ground reference. Probes measure the output voltage and load current.
Expected Behavior
With DCMag set to 5 V and RLOAD set to 1K, Vout should measure about 5 V and load current should be about 5 mA.
Suggested Experiments
Change DCMag to 3.3 or 12 and rerun the operating point. Compare Iload with Ohm's law using the 1K load.
Featured Component
The featured component exposes DC magnitude plus AC magnitude and phase fields for source reuse across operating-point and sweep examples.
Components used
Components used
1 component
Try this circuit yourself
Free to get started. No download — runs in your browser with a full SPICE engine.