Normally Open Relay Coil-Controlled Load

Application

A pulsed coil supply operates the Normally Open Relay while a separate 5 V source feeds its contact load.

Schematic Organization

The isolated contact supply is on the upper left. The coil pulse source is below it. The relay is centered with its load and measurement to the right.

Expected Behavior

The measured contact node changes state as coil current crosses the relay pickup and dropout thresholds.

Suggested Experiments

Adjust the coil pulse amplitude or pickup threshold and observe when the contact output changes state.

Featured Component

Normally Open Relay is the featured device. Its editor-visible symbol, pins, parameters, and simulation model are used directly in this circuit.