Diode I/V Curve
CircuitSim
·
Created Oct 3, 2026
·
Updated Oct 3, 2026
Details
Components
2
Schematic
Yes
Simulation
DC sweep
Copies
Not copied yet
About this circuit
Sweep the voltage across a junction diode to reveal its exponential forward current and small reverse leakage.
Circuit notes
Diode I/V Curve
Sweep the voltage across a junction diode to reveal its exponential forward current and small reverse leakage.
The DC sweep source connects directly across D1. Vd measures the applied anode-to-cathode voltage and Id measures its current. The sweep runs from −1 V to +0.72 V in 5 mV increments.
D1 uses IS = 10 fA and n = 1. Reverse current is very small, while forward current grows exponentially. At +0.72 V, the current is about 12.29 mA. The horizontal chart axis is swept source voltage, not elapsed time; because no series resistance separates source and diode, that axis is also the diode voltage.
Read the chart. The voltage panel confirms the sweep; the current panel is the I/V curve. Its linear current scale emphasizes the forward knee. Use the table to inspect small values that appear close to zero at this scale.
Try it. Change D1’s Emission coefficient from 1 to 1.2. The forward current at a given voltage becomes smaller. Restore 1. Keep the +0.72 V sweep endpoint for a meaningful low-current comparison.
Model limits. The direct source connection is an ideal measurement setup. A physical test needs current compliance or a limiting resistor. Series resistance, breakdown, capacitance and charge storage are omitted from this static example.
Components used
Components used
2 components
Try this circuit yourself
Free to get started. No download — runs in your browser with a full SPICE engine.