MOSFET Current Mirror
CircuitSim
·
Created Oct 3, 2026
·
Updated Oct 3, 2026
Details
Components
3
Schematic
Yes
Simulation
DC operating point
Copies
Not copied yet
About this circuit
Copy a reference current with two matched MOSFETs sharing a gate-source voltage.
Circuit notes
MOSFET Current Mirror
Copy a reference current with two matched MOSFETs sharing a gate-source voltage.
R1 = 4 kΩ feeds a diode-connected M1 from 5 V. M2 shares its gate and source voltages. Both devices initially have the same model and W/L ratio. RL = 1 kΩ provides the output drain load.
Vref is green and Vout red. Iref is blue and Iout purple. Equal sizes give nearly equal currents; doubling M2 width gives approximately twice the output current. The mirror requires sufficient output drain voltage. Matching errors, temperature gradients and channel-length modulation are absent here.
Read the results. The saved operating-point table shows the probe values. The first voltage probe is green and the second red. The first current probe is blue; a second current probe is purple.
Model limits. The generic level-1 MOSFET model is intended to explain bias and low-frequency behavior. It omits detailed subthreshold conduction, gate charge, body effects and thermal behavior; these are not part-specific design results.
Try it. Set M2 channel width W to 200 µm; output current becomes approximately twice the reference current. Restore the original values after comparing the results.
Components used
Components used
3 components
Try this circuit yourself
Free to get started. No download — runs in your browser with a full SPICE engine.