Skip to main content

Inverter Oscillator

CI

CircuitSim

·

Created Oct 3, 2026

·

Updated Oct 3, 2026

Preview will appear once the owner saves the schematic
Details

Components

5


Schematic

Yes


Simulation

Transient analysis


Copies

Not copied yet

About this circuit

Three inverting stages with explicit RC delays form a ring oscillator.

Circuit notes

Inverter Oscillator

Three inverting stages with explicit RC delays form a ring oscillator.

Circuit operation

Three CMOS inverters form an odd-inversion feedback loop. Each output drives the next gate through a 10 kΩ resistor and a 10 nF capacitor. Unequal initial capacitor voltages provide a visible startup disturbance.

Expected behavior

td≈RCln⁡2t_d\approx RC\ln2 f≈16RCln⁡2=2.40 kHzf\approx\frac{1}{6RC\ln2}=2.40\,\mathrm{kHz}

The estimate assumes a half-supply switching threshold and ideal rail transitions. Compare the three phase-shifted traces after startup; the measured frequency differs somewhat because each stage begins its next transition before fully settling. Initial-condition simulation is enabled deliberately.

Reading the results

The first voltage probe is green and the second is red. Additional voltage traces use distinct colors. Current probes, when present, start with blue and then purple. The chart opens with separate traces on a fixed time window; the table retains the same probe order. Zoom to extents includes the complete schematic.

The saved transient runs for 3.0 ms with a maximum step of 0.50 µs. Compare settled cycles after startup and use time-axis cursors to measure delays or periods.

Try a change

Set all three timing capacitors to 20 nF; the oscillation frequency approximately halves. Restore the saved values after comparing the result.

Model limits

These are generic transistor models, not a specific manufactured part. The CMOS models use illustrative threshold, transconductance, junction-capacitance and series-resistance parameters. Device mismatch, temperature drift, layout parasitics, breakdown and detailed noise are not represented. The schematic and component properties expose the values used.

Components used

Components used
5 components
NameManufacturerMPNCountType

Capacitor

Generic

—

3

Official

N-channel MOSFET

Generic

—

3

Official

P-channel MOSFET

Generic

—

3

Official

Resistor

Generic

—

3

Official

DC Voltage Source

Generic

—

1

Official

Try this circuit yourself

Free to get started. No download — runs in your browser with a full SPICE engine.