Skip to main content

CMOS NAND

CI

CircuitSim

·

Created Oct 3, 2026

·

Updated Oct 3, 2026

Preview will appear once the owner saves the schematic
Details

Components

5


Schematic

Yes


Simulation

Transient analysis


Copies

Not copied yet

About this circuit

Parallel p-channel pull-ups and series n-channel pull-downs implement the NAND truth table.

Circuit notes

CMOS NAND

Parallel p-channel pull-ups and series n-channel pull-downs implement the NAND truth table.

Circuit operation

Either p-channel transistor can pull the output high. Both n-channel transistors must conduct in series to pull it low. The two input periods differ so all four input combinations appear.

Expected behavior

Y=A∧B‾Y=\overline{A\land B} Y(0,0)=Y(0,1)=Y(1,0)=1Y(0,0)=Y(0,1)=Y(1,0)=1

Only A = B = 5 V gives a low output. Inspect the middle of each input plateau, not a switching edge. The series pull-down has a different effective resistance from the parallel pull-up, so edge behavior is not perfectly symmetric.

Reading the results

The first voltage probe is green and the second is red. Additional voltage traces use distinct colors. Current probes, when present, start with blue and then purple. The chart opens with separate traces on a fixed time window; the table retains the same probe order. Zoom to extents includes the complete schematic.

The saved transient runs for 4.0 ms with a maximum step of 1.00 µs. Use the middle of settled plateaus for logic comparisons and the time-axis cursors for delays.

Try a change

Set V1 period to 2 ms and pulse width to 950 µs; compare the time scale of the response. Restore the saved values after comparing the result.

Model limits

These are generic transistor models, not a specific manufactured part. The 5 V circuits use illustrative threshold, transconductance, junction-capacitance and series-resistance parameters. Device mismatch, temperature drift, layout parasitics, breakdown and detailed noise are not represented. The schematic and component properties expose the values used.

Components used

Components used
5 components
NameManufacturerMPNCountType

N-channel MOSFET

Generic

—

2

Official

P-channel MOSFET

Generic

—

2

Official

Pulse Voltage Source

Generic

—

2

Official

DC Voltage Source

Generic

—

1

Official

Resistor

Generic

—

1

Official

Try this circuit yourself

Free to get started. No download — runs in your browser with a full SPICE engine.