JK Flip-Flop
CircuitSim
·
Created Oct 3, 2026
·
Updated Oct 3, 2026
Details
Components
3
Schematic
Yes
Simulation
Transient analysis
Copies
Not copied yet
About this circuit
Exercise hold, set, reset, and toggle commands on an edge-triggered JK flip-flop.
Circuit notes
JK Flip-Flop
Exercise hold, set, reset, and toggle commands on an edge-triggered JK flip-flop.
Circuit operation
The JK device samples J and K on each rising clock edge. Unequal pulse periods exercise hold, set, reset, and toggle states. Qbar is the complementary output.
Expected behavior
J = K = 0 holds; J = 1, K = 0 sets; J = 0, K = 1 resets; J = K = 1 toggles. Commands act at the active edge rather than throughout the clock-high interval.
Reading the results
The first voltage probe is green and the second is red. Additional voltage traces use distinct colors. Current probes, when present, start with blue and then purple. The chart opens with separate traces on a fixed time window; the table retains the same probe order. Zoom to extents includes the complete schematic.
The saved transient runs for 8.0 ms with a maximum step of 2.00 µs. Compare settled cycles after startup and use time-axis cursors to measure delays or periods.
Try a change
Set V1 period to 2 ms and pulse width to 998 µs. State changes follow the slower clock while the logic relationship remains the same. Restore the saved values after comparing the result.
Model limits
Logic gates use ideal threshold models; storage elements include finite propagation delay. Unless a transistor or LED is explicitly drawn, internal supplies, input loading, output-current limits, and metastability are abstracted. Device mismatch, temperature drift, layout parasitics, breakdown and detailed noise are not represented. The schematic and component properties expose the values used.
Components used
Components used
3 components
Try this circuit yourself
Free to get started. No download — runs in your browser with a full SPICE engine.