Skip to main content

4-Bit Ripple Counter

CI

CircuitSim

·

Created Oct 3, 2026

·

Updated Oct 3, 2026

Preview will appear once the owner saves the schematic
Details

Components

4


Schematic

Yes


Simulation

Transient analysis


Copies

Not copied yet

About this circuit

Cascade four toggle stages so each output clocks the next stage at half its input frequency.

Circuit notes

4-Bit Ripple Counter

Cascade four toggle stages so each output clocks the next stage at half its input frequency.

Circuit operation

Each falling-edge JK stage has J = K = 1, so it toggles. Q0 clocks the second stage, which clocks the third, and so on. The first stage receives the external clock.

Expected behavior

fQi=fclk2i+1f_{Q_i}=\frac{f_{clk}}{2^{i+1}} N=Q0+2Q1+4Q2+8Q3N=Q_0+2Q_1+4Q_2+8Q_3

The four-bit value increases on each falling clock edge and wraps from 15 to 0. Changes propagate through the stages with finite delay, so intermediate bit patterns can briefly appear. This is an asynchronous ripple counter.

Reading the results

The first voltage probe is green and the second is red. Additional voltage traces use distinct colors. Current probes, when present, start with blue and then purple. The chart opens with separate traces on a fixed time window; the table retains the same probe order. Zoom to extents includes the complete schematic.

The saved transient runs for 18.0 ms with a maximum step of 2.00 µs. Compare settled cycles after startup and use time-axis cursors to measure delays or periods.

Try a change

Set V1 period to 2 ms and pulse width to 998 µs. State changes follow the slower clock while the logic relationship remains the same. Restore the saved values after comparing the result.

Model limits

Logic gates use ideal threshold models; storage elements include finite propagation delay. Unless a transistor or LED is explicitly drawn, internal supplies, input loading, output-current limits, and metastability are abstracted. Device mismatch, temperature drift, layout parasitics, breakdown and detailed noise are not represented. The schematic and component properties expose the values used.

Components used

Components used
4 components
NameManufacturerMPNCountType

Resistor

Generic

—

5

Official

JK Flip-Flop

Generic

—

4

Official

DC Voltage Source

Generic

—

1

Official

Pulse Voltage Source

Generic

—

1

Official

Try this circuit yourself

Free to get started. No download — runs in your browser with a full SPICE engine.