Skip to main content

Synchronous Counter

CI

CircuitSim

·

Created Oct 3, 2026

·

Updated Oct 3, 2026

Preview will appear once the owner saves the schematic
Details

Components

3


Schematic

Yes


Simulation

Transient analysis


Copies

Not copied yet

About this circuit

A common clock advances all four state bits together; enable and reset control the count.

Circuit notes

Synchronous Counter

A common clock advances all four state bits together; enable and reset control the count.

Circuit operation

The counter shares one clock across all state bits. Enable can pause counting; Reset synchronously clears the state at the next rising clock edge. Parallel-load inputs are held inactive.

Expected behavior

Nnext=(N+1) mod 16N_{next}=(N+1)\bmod16 ENABLE=0⇒Nnext=NENABLE=0\Rightarrow N_{next}=N

Read Q3 Q2 Q1 Q0 as a binary word. The saved run includes an enable-low pause and a reset pulse. Reset takes priority over enable and acts at an edge, not immediately when its voltage rises.

Reading the results

The first voltage probe is green and the second is red. Additional voltage traces use distinct colors. Current probes, when present, start with blue and then purple. The chart opens with separate traces on a fixed time window; the table retains the same probe order. Zoom to extents includes the complete schematic.

The saved transient runs for 32.0 ms with a maximum step of 2.00 µs. Compare settled cycles after startup and use time-axis cursors to measure delays or periods.

Try a change

Set V1 period to 2 ms and pulse width to 998 µs. State changes follow the slower clock while the logic relationship remains the same. Restore the saved values after comparing the result.

Model limits

Logic gates use ideal threshold models; storage elements include finite propagation delay. Unless a transistor or LED is explicitly drawn, internal supplies, input loading, output-current limits, and metastability are abstracted. Device mismatch, temperature drift, layout parasitics, breakdown and detailed noise are not represented. The schematic and component properties expose the values used.

Components used

Components used
3 components
NameManufacturerMPNCountType

Resistor

Generic

—

4

Official

Pulse Voltage Source

Generic

—

3

Official

Try this circuit yourself

Free to get started. No download — runs in your browser with a full SPICE engine.