Skip to main content

Traffic Light

CI

CircuitSim

·

Created Oct 3, 2026

·

Updated Oct 3, 2026

Preview will appear once the owner saves the schematic
Details

Components

6


Schematic

Yes


Simulation

Transient analysis


Copies

Not copied yet

About this circuit

Decode a three-state synchronous controller into red, green, and yellow indicators.

Circuit notes

Traffic Light

Decode a three-state synchronous controller into red, green, and yellow indicators.

Circuit operation

A two-stage modulo-three state machine drives three decoded states. NOR(Q0,Q1) lights red, Q0 lights green, and Q1 lights yellow. Each LED has a 1 kΩ current-limiting resistor.

Expected behavior

00→01→10→0000\to01\to10\to00 R+G+Y=1R+G+Y=1

The sequence is red → green → yellow → red with equal one-clock dwell times. The saved fast timing makes the logic easy to inspect in the chart; this is an illustrative state machine, not a road-safety controller.

Reading the results

The first voltage probe is green and the second is red. Additional voltage traces use distinct colors. Current probes, when present, start with blue and then purple. The chart opens with separate traces on a fixed time window; the table retains the same probe order. Zoom to extents includes the complete schematic.

The saved transient runs for 26.0 ms with a maximum step of 2.00 µs. Compare settled cycles after startup and use time-axis cursors to measure delays or periods.

Try a change

Set V1 period to 2 ms and pulse width to 998 µs. State changes follow the slower clock while the logic relationship remains the same. Restore the saved values after comparing the result.

Model limits

Logic gates use ideal threshold models; storage elements include finite propagation delay. Unless a transistor or LED is explicitly drawn, internal supplies, input loading, output-current limits, and metastability are abstracted. Device mismatch, temperature drift, layout parasitics, breakdown and detailed noise are not represented. The schematic and component properties expose the values used.

Components used

Components used
6 components
NameManufacturerMPNCountType

Resistor

Generic

—

4

Official

LED

Generic

—

3

Official

JK Flip-Flop

Generic

—

2

Official

Digital Inverter

Generic

—

1

Official

NOR 2-Input

Generic

—

1

Official

Pulse Voltage Source

Generic

—

1

Official

Try this circuit yourself

Free to get started. No download — runs in your browser with a full SPICE engine.