Skip to main content

Master-Slave Flip-Flop

CI

CircuitSim

·

Created Oct 3, 2026

·

Updated Oct 3, 2026

Preview will appear once the owner saves the schematic
Details

Components

4


Schematic

Yes


Simulation

Transient analysis


Copies

Not copied yet

About this circuit

Two level-sensitive latches on opposite clock phases transfer data once per rising clock edge.

Circuit notes

Master-Slave Flip-Flop

Two level-sensitive latches on opposite clock phases transfer data once per rising clock edge.

Circuit operation

MASTER is transparent during the low clock phase; SLAVE is transparent during the high clock phase. An inverter supplies the opposite enable phase. The complementary outputs have light measurement loads.

Expected behavior

Q(tk+)=D(tk−)Q(t_k^+)=D(t_k^-) tk: rising clock edget_k:\ \text{rising clock edge}

Master follows D while Clock is low. On the rising edge, Master closes and Slave transfers the stored value to Q. Q remains stable while D changes during the high clock phase. The two latch symbols expose the mechanism of edge-triggered storage.

Reading the results

The first voltage probe is green and the second is red. Additional voltage traces use distinct colors. Current probes, when present, start with blue and then purple. The chart opens with separate traces on a fixed time window; the table retains the same probe order. Zoom to extents includes the complete schematic.

The saved transient runs for 8.0 ms with a maximum step of 2.00 µs. Compare settled cycles after startup and use time-axis cursors to measure delays or periods.

Try a change

Set V1 period to 2 ms and pulse width to 998 µs. State changes follow the slower clock while the logic relationship remains the same. Restore the saved values after comparing the result.

Model limits

Logic gates use ideal threshold models; storage elements include finite propagation delay. Unless a transistor or LED is explicitly drawn, internal supplies, input loading, output-current limits, and metastability are abstracted. Device mismatch, temperature drift, layout parasitics, breakdown and detailed noise are not represented. The schematic and component properties expose the values used.

Components used

Components used
4 components
NameManufacturerMPNCountType

Resistor

Generic

—

4

Official

D Latch

Generic

—

2

Official

Pulse Voltage Source

Generic

—

2

Official

Digital Inverter

Generic

—

1

Official

Try this circuit yourself

Free to get started. No download — runs in your browser with a full SPICE engine.